The system for creating micro trenches for the installation of micro pipes or fenders in the FTTH sector opens up to new horizons with the machine Cobra 60-3X.
The construction of micro trenches traditionally uses asphalt cutting machines. These machines cut two parallel cuts into the asphalt (either simultaneously or in separate phases), approximately 15-20 cm apart, to a depth of 15-20 cm. The material between the two cuts must then be removed using appropriate machinery. This step is traditionally costly in terms of equipment costs, processing time, and the cost of repair materials.

With the Cobra 60-3X A new phase begins. This professional asphalt cutter, thanks to the use of 3 high-quality diamond blades mounted in a "sandwitch" arrangement using appropriate spacers, is capable of making a single cut approximately 2 cm wide and 15 cm deep (500 mm blades) or up to 20 cm (600 mm blades).
With an optional spacer kit, the cut can be widened to 2.5 or 3.0 cm. The volume of material to be removed is therefore much lower than with traditional processing (approximately 90% less) and, consequently, times are greatly reduced, as are recovery costs. 
The cut is more than sufficient to accommodate 12/10, 14/10 microtubes or fenders.

Construction Features

The Cobra 60-3X is a highly professional machine, built for intensive use and designed to reduce vibrations, the primary enemies of disc life. 

Versions

Motor gas Honda GX630 20 HP

Motor Diesel Lombardini MD190 16 HP

https://rertech.it/prodotto/macchina-per-micro-trincea-cobra-60-3x/